Soap scum. Stiff clothing. Clogged pipes. No matter what you try, it’s hard to get your surfaces clean. Scale builds up. Dishes come out of the dishwasher with spots on them. All of these problems occur because of hard water, a frustrating but fixable situation.
The term, “hard water,” refers to water with a high mineral content. The most common minerals that cause water hardness are calcium and magnesium. As water is absorbed into the ground, the minerals are pulled from the earth and eventually end up in a household’s water supply. Hard water can clog household plumbing.
Water hardness, or how much of a mineral is present in water, is measured in grains per gallon (GPG), parts per million (PPM), or milligrams per liter (MG/L). Water up to 1 GPG is considered soft, water; from 1 to 3.5 GPG is considered moderate, and water 3.5 to 7 GPG is hard water. Kits used to test water hardness can be purchased at a pool supplier or from a water softener dealer.
Many water softeners plug right into the household water supply. Ionic exchange water softeners consist of negatively charged plastic beads, a brine tank, and a regenerating system with a timer or other monitoring device. Sodium or potassium chloride is added to the brine tank when regeneration is necessary. Home water softeners range in price from $400 to $1,200, and the salt ranges from $5 to $7 per bag. Price depends on type, size, and type of softening agent. Alternatively, magnetic water softeners consist of only 2 magnets attached to the outside or inside of water pipes.
Water softeners work by replacing ions of the minerals that cause hardness with “softer” ions. Water is filtered through charged plastic beads and the magnesium or calcium ions are replaced with sodium or potassium ions. In the case of magnetic water softeners, magnetic energy causes chemical changes in the minerals.
Using water softeners poses no health risks, except for those who are on sodium-restricted diets. Keep bottled water on hand for cooking and consumption, or use potassium chloride instead of sodium chloride to soften. Potassium chloride is more expensive than sodium chloride. There are also no health risks associated with choosing not to soften water.
Related Articles of Interest :
-
The Advantages of Ionic Exchange Water Softeners
10 August 2010 8:30 PM |
No Comments
It can be difficult to decide which method for softening hard water is best because there are a number of choices available. Cost of a water softener system – from $400 to $1,200 — can be a factor, as well as how the water softener...
-
A Look at Water Softener Systems
10 August 2010 8:30 PM |
No Comments
Do you ever feel like nothing you do when you clean works? Do you still feel dirty when you get out of the shower? Does your hair feel dry after you wash it? The problem may not be the soap or detergents you are using....
-
The Benefits of Magnetic Water Softeners
10 August 2010 8:30 PM |
No Comments
With the array of choices we have for softening hard water, it can be difficult to decide which method will work best. Therefore, cost is one factor to consider as well as how the unit is set up, its size and its softening capacity. Testing...
-
The Functions and Benefits Water Softener Salt
10 August 2010 8:30 PM |
No Comments
Hard water causes an array of problems in home and industrial settings. Soap doesn’t lather or rinse well, clothing, skin, and hair feel stiff or sticky after washing, and dishes appear dirty after having been run through the dishwasher. Worst of all, plumbing can become...
-
A Review of Popular Water Softener Products
10 August 2010 8:30 PM |
No Comments
With so many types and brands of water softeners to choose from, how does a consumer decide what is right for their needs? How does one compare water softeners and find the one that will work the best for them? When it comes to buying...
-
Water Treatment Systems
10 August 2010 8:30 PM |
No Comments
Water is a vital necessity for mankindx97it is used for drinking, cooking, bathing, washing clothes and utensils, gardening, pets, cleaning, agriculture, and boilers and water heaters. Water is almost invariably contaminated with acidity, salts, metals, color, odor, taste, and other organic pollutants like insecticides and...
-
Bare Minerals
10 August 2010 8:30 PM |
No Comments
Minerals are natural elements or compounds formed through geological processes in the earth’s crust. Minerals range from pure elements to simple salts or complex silicates. Minerals are basically inorganic, homogeneous solids with a crystal structure and a definite chemical composition. The chemical makeup is different...
-
Water Treatments
10 August 2010 8:30 PM |
No Comments
Water is essential for the sustenance and well-being of all lifex97plant, animal, and human. The total body water (TBW) content averages 60% of body weight in men and about 55% in women. Vegetables contain about 80% to 90% water. Rivers and lakes form the source...
-
Magnesium Chloride
10 August 2010 8:30 PM |
No Comments
The chemical formula for magnesium chloride is MgCl2. It is present in hydrated forms such as MgCl2.6H2O. It is a highly soluble Lewis acid. It is extracted from seawater and is a source of magnesium for metallurgical processes. Industrially, it is prepared by Dow’s process...
-
Magnesium Hydroxide
10 August 2010 8:30 PM |
No Comments
Magnesium hydroxide has the chemical formula Mg(OH)2. It is available naturally as the mineral brucite. It is a white or colorless, odorless powder and is sparingly soluble in water. It is an alkaline hydroxide compound. It is generally prepared by reacting magnesium sulfate or chloride...