Ultrasonic generally refers to acoustic frequencies above twenty thousand hertz, which is the upper limit of human hearing range. These frequencies are, however, audible to certain animals such as mice, bats, dolphins, and dogs, all of which have a higher hearing range as compared to humans. The human inability to hear ultrasonic sound waves is caused by the middle ear that acts as a low-pass filter.
The ultrasonic welding process offers many advantages over other welding techniques and is most commonly used in manufacturing wire harnesses, electronic components, and appliances. Ultrasonic welding is used when multiple layers of foil need to be welded onto a terminal or welded together with different combination of metals such as copper, aluminum, lithium, and nickel.
Ultrasonic welding uses a ‘low power friction’ welding process in which little heat is generated and better control can be applied. The basic idea is to scrub work pieces across each other while clamped under pressure to create a bond. Work pieces are placed on an anvil that is knurled with fine ridges that bite into the material, holding it in place during the weld process. The ultrasonic tool is then lowered onto the pieces, clamping them under pressure and creating the needed scrubbing action. This tool vibrates at a frequency of twenty kilohertz for most welding operations and around forty kilohertz for low power applications.
The scrubbing motion helps in dispersing oxide layers and other impurities at the boundary until the base metals are in direct contact. The atoms of the work pieces then diffuse into each other, creating a purely metallurgical bond.
Ultrasonic welding techniques are used in different industrial sectors such as pharmaceutical, medical, food, cosmetic, and household and personal care manufacturing. They have enabled the ironing out of minor flaws in products during the production process, which if left unchecked, can damage the brand value of a product or company.
Related Articles of Interest :
-
Plastic Welding
10 August 2010 8:30 PM |
No Comments
Plastic welding is the process of joining work pieces made from plastic with the help of advanced welding techniques. Plastic welding can be used for joining two or more work pieces made from the same type of plastic or two or more pieces made from...
-
Underwater Welding
10 August 2010 8:30 PM |
No Comments
Underwater welding techniques are most commonly used in executing marine engineering projects such as installation of oil and gas rigs. Underwater welding is mostly related to welding work pieces made from different types of metals such as steel, aluminum, copper, and others. Underwater welding can...
-
Aluminum Welding
10 August 2010 8:30 PM |
No Comments
Welding metalwork pieces such as those made from aluminum is relatively easy as it melts at a much lower temperature and does not crack after solidifying. Aluminum welding is done according to the type of aluminum used such as commercial grade aluminum having 99 percent...
-
Welding Inverters
10 August 2010 8:30 PM |
No Comments
Welding inverters help improve weld quality and reduce operating costs. But one has to select the right kind of tungsten to get the maximum benefit from a welding inverter. Experts used to recommend the use of pure tungsten if you were using a welding inverter,...
-
Welding Automation
10 August 2010 8:30 PM |
No Comments
With advancements in technology, machining processes have become faster and more efficient. Similarly, the addition of automation techniques in welding has been very crucial in enhancing welding processes that are repetitive in nature. Automated welding employs the use of a robot. This mechanized, programmable tool...
-
Welding Machines
10 August 2010 8:30 PM |
No Comments
In industrial context, welding refers to a fabrication process that joins materials such as metals and thermoplastics, by causing coalescence. This is typically done by softening the work pieces and adding a filler material, which is often a welding rod, to form a pool of...
-
Welding Rods
10 August 2010 8:30 PM |
No Comments
In technical terms, welding rods are commonly known as filler metals. A welding rod is a metal that is used in the process of welding to fill a joint that has to be fixed. The process of welding is typically done by melting the work...
-
Welding Equipment
10 August 2010 8:30 PM |
No Comments
In an industrial context, welding refers to a fabrication process that joins materials such as metals and thermoplastics, by causing coalescence. This is typically done by melting the work pieces and adding a filler material such as a welding rod, to form a pool of...
-
Welding Microscopes
10 August 2010 8:30 PM |
No Comments
Micro welding or micro-dimensional welding is a widely used and accepted process in today’s industry. The process is carried out under a welding microscope which helps to weld small areas with maximum accuracy. Welding microscopes are specially designed to offer great control of part positioning...
-
Laser Welding
10 August 2010 8:30 PM |
No Comments
A laser can be defined as an optical source, which emits photons in a coherent beam. Lasers were first discovered in the year 1960 and were proposed as a variation of the ‘maser’ principle at that time. Laser technology has improved greatly since that time...