If a homeowner is tackling the toxic mold himself, he should invest in a facemask, safety goggles, and household rubber gloves, as inhaling or touching toxic mold can be poisonous. A mask, particularly the kind used by carpenters to keep from inhaling sawdust, would work well for this task.
Lift-tape testing is an easy and effective way to test toxic mold. Using 1-inch wide and 3-inch long, clear adhesive tape, fold the tape under itself, sticky-side to sticky-side, and form a tab. Holding the tab, press the tape onto the mold-infected surface hard enough to get a sample on to the tape. However, do not press so hard that the sample gets squashed, as that will obscure important characteristics of the mold structure. It is advisable to prepare two or more samples of mold.
Press the tape, sticky-moldy-side down, to the inside wall of a new, unopened zipper bag. Freezer bags work best, as they are broad and will keep the tape flat. As you press the adhesive tape onto the bag, stick down first the free end that you did not touch, and then press down the rest of the tape onto the bag by pressing on the non-sticky side of the tape. You can then send it to the Mold Inspector Laboratory for laboratory analysis and identification.
This technique is called Direct Sampling and is considered the best means to identify visible toxic mold in a home, office, or other building. As toxic mold spores are rarely airborne (unless disturbed physically), direct sampling may be the only way to know if you have toxic mold spores in the building.
Related Articles of Interest :
-
Toxic Mold
10 August 2010 8:30 PM |
No Comments
Mold is part of the natural environment. It is a form of fungus that is ubiquitous in character and reproduces by means of microscopic spores, which are invisible to the naked eye and drift through the air. Molds grow indoors when the spores come into...
-
An Introduction To Toxic Mold
10 August 2010 8:30 PM |
No Comments
Toxic molds have become the prime cause of concern among households. Most toxic molds found in homes belong to the fungal strain Stachybotrys chartarum, which is a slimy greenish-black fungus with a faint mildew-like odor. Like other mold strains, toxic molds also thrive in damp...
-
Toxic Mold Tort Experts
10 August 2010 8:30 PM |
No Comments
A person can seek legal assistance if he or she has been affected by prolonged exposure to toxic mold. Depending on individual situations, the defendants in mold-related lawsuits include contractors, construction managers, construction component suppliers, property managers, architects, and landlords. Damages include the cost of...
-
Toxic Mold Symptoms
10 August 2010 8:30 PM |
No Comments
Toxic mold symptoms are often overlooked or misdiagnosed by doctors owing to their likeness to flu and other illnesses. Recent years have witnessed a rise in the cases of toxic mold-related illnesses across the U.S. Toxic mold, which is often caused by leaky pipes or...
-
Mold Inspection and Testing
10 August 2010 8:30 PM |
No Comments
Inspection and testing of mold is a common procedure adopted while buying new homes. Any property with a mold growth in it is considered unsuitable by new buyers unless and until remedial measures are employed. It is wise to carry out mold detection from time...
-
Black Mold
10 August 2010 8:30 PM |
No Comments
There are numerous strains of molds that are grayish or black in color. Only two of these strains, Stachybotrys and Memnoniella, are known to be toxic. Toxic black molds release secondary metabolites in the air called mycotoxins. Harmless black molds include Cladosporium, Pithomyces, Ulocladium, Aureobasidium,...
-
Tape
10 August 2010 8:30 PM |
No Comments
Tape is a general term used to define a long, narrow, flexible piece of material, which may be cloth, paper, metal or plastic. Tape can differ in size, type, category, and application. The term varies very widely in its usage. If you hear someone say,...
-
Mold
10 August 2010 8:30 PM |
No Comments
Molds are fungal growths that reproduce asexually by means of spore formation. Their basic body consists of a threadlike growth called the mycelium, which sends out branches called hyphae. It is in the tips of these hyphae that spores are formed. Molds are saprophytic in...
-
Mold Allergies
10 August 2010 8:30 PM |
No Comments
Mold is a type of fungus that grows on the surface of organic material such as food particles and living plants. The reproductive particles or seeds that these molds form are known as spores. The spores float in the air like pollen and are a...
-
A Guide To Duct Tape
10 August 2010 8:30 PM |
No Comments
Duct Tape is a fabric based, adhesive material mainly used for sealing joints in sheet metal ductwork. This cloth tape, an indispensable item in tool kits, has polyethylene resin coatings on one side and a rubber based sticking material on the other side. Duct tape...