Metric fasteners are fasteners that are manufactured and labeled according to a worldwide standard of measurement. That worldwide standard is set by the International Organization for Standardization (ISO), which is based in Geneva, Switzerland. That worldwide standard is based on the metric system.
There are many ways in which fasteners can be measured and manufactured for size. It is important that there be some kind of standard for screws, with the countless number of products and equipment that rely on screws to stay fast together. The United Kingdom, United States, and Canada invented as faster measurement system in 1949 called the Unified Thread Standard. They hoped it would become the worldwide standard. But the ISO standards eventually won out. The UK no longer uses that standard at all, and Canada is currently midway through the transition to the ISO metric fastener standard. Today, 40% of screws and products made in the United States are made with metric faster systems. Gradually, metric fasteners are replacing UTS fasteners. Soon, UTS will be extinct.
Metric fasteners are measured in millimeters by their thread diameter from edge to edge, and not by the shank portion of the screw. The capital letter “M” will precede the number of millimeters wide the thread is. For example, a metric fastener can be 5 millimeters wide, and it will be denoted as M5. A thread 6 millimeters wide is denoted as M6.
Metric fasteners used to come with two levels of thread thickness: fine and coarse. Neither one was better or worse than the other, but they are not compatible. So the ISO decided on fine-threaded screws as the standard. Today, most new products are made with fine threads in mind, but you can still get coarse threads, since some older products that use coarse threads still need to be repaired from time to time.
Related Articles of Interest :
-
Fasteners: An Overview
10 August 2010 8:30 PM |
No Comments
Fasteners are the pervasive and unseen force holding our industrial world together. Only gravity can claim a greater responsibility for keeping things together. When one speaks of fasteners, one refers to all manner of screws, bolts, anchors, Velcro, threaded bars, and so on. Fasteners hold...
-
A Look at Industrial Fasteners
10 August 2010 8:30 PM |
No Comments
Industrial fasteners are used in aerospace, military, construction, and other industrial applications. These are extremely strong, extremely weather resistant, and almost completely corrosion- and rust-proof. They are made from a variety of metals, including stainless steel, chromium, and carbon. Industrial fasteners can take many forms,...
-
A Look at Deck Fasteners
10 August 2010 8:30 PM |
No Comments
Deck fasteners are screws especially manufactured to fasten the many soft, thin planks of a wood en deck in place. Wooden decks must be able to withstand many different kinds of weather and corrosion, and so deck fasteners must be able to stand up to...
-
The Benefits of Plastic Fasteners
10 August 2010 8:30 PM |
No Comments
Plastic fasteners are used where there are conditions in which metal will just not do. Plastic fasteners can be chemical-resistant, corrosion-resistant, very strong, heat-resistant, non-conductive, impervious to UV light, and very lightweight. The applications are endless. Plastic fasteners can be just as strong, and keep...
-
The Benefits of Stainless Steel Fasteners
10 August 2010 8:30 PM |
No Comments
Stainless steel fasteners are made of steel that has been mixed with at least a ten percent compound of chromium, and possibly other metals, so that the steel doesn’t rust or corrode. This makes stainless steel fasteners great for outdoor conditions, where there is a...
-
The Advantages of Hook Loop Fasteners
10 August 2010 8:30 PM |
No Comments
Hook-loop fasteners are a two-faced fastening system whereby one face is covered in tiny nylon fibers with little hooks on the ends of them, and the other face is covered in tiny nylon loops. When the two faces are pressed together, some of the hooks...
-
Benefits of Concrete Fasteners
10 August 2010 8:30 PM |
No Comments
A concrete fastener is a screw, bolt system, or other fastening technique, designed to attach any non-structural object to a section of concrete. The concrete can be in the ground, or it can be part of a wall or other standing structure. There are an...
-
An Introduction to Metal Stamping Machines
10 August 2010 8:30 PM |
No Comments
Metal stamping machines are used to give the exact shape and parameters to the metal products. When a metal sheet is inserted into the metal stamping machine, it can be molded into the exact shape. The kind of shape that has to be given to...
-
The Custom Metal Stamping Process
10 August 2010 8:30 PM |
No Comments
Today, manufacturing has embraced a wide range of advanced technologies that have enabled the reduction of turnaround time considerably. As a result, demand on the metal stamping industry has also increased as the components have to be made to be exactly suitable to the final...
-
Tapestry
10 August 2010 8:30 PM |
No Comments
Tapestry is a textile art in which cloths are woven with colorful and rich designs or scenes, and these are used as wall hangings or furniture covers. Mythological and religious images, hunting scenes and floral designs are common subjects for weaving. The art of tapestry...