An inflatable boat trailer is needed if the user has a Rigid Inflatable Boat (RIB), since those boats have only a deflatable collar surrounding a solid hull. RIB’s are regular boats in many ways. A true inflatable boat does not need a trailer but in some cases the user may want one.
Larger inflatable boats can take some time to inflate and be assembled completely. If the user has an inflatable boat with an outboard motor, they may prefer to get it ready at home before heading to the launching area. In that case, an inflatable boat trailer may be necessary.
The requirements for an inflatable boat trailer are the same as for a conventional boat except that the user will not need the load capacity necessary for a conventional boat because an Inflatable boat is much lighter.
If the user is looking at used trailers, they must be sure to inspect it carefully for any damage that may already exist, be sure it has functioning brakes in good condition, check the wiring for the lights and see if the tires have sufficient tread.
Some trailers feature a tipping frame that hinges and allows the boat to enter the water without having to back out as far as with a conventional boat trailer. It also makes retrieving the boat easier because the user can get under the bow quickly.
While all packages of Inflatable boats are portable, an inflatable boat trailer allows the user to keep their boat rigged and ready to go. A common inflatable boat trailer features an all welded steel frame, a roller on the back for smooth launching, 13” tires, tie down loops, sealed beam lights, spare tire mount, a 7’ X 12’ bed, a 1500 lb. capacity and a weight of 300 lbs. Some inflatable boat trailers include aluminum, galvanized and steel frames, for both fresh and saltwater use.
Related Articles of Interest :
-
Should You Buy a Used Inflatable Boat?
10 August 2010 8:30 PM |
No Comments
There are two types of used inflatable boats for sale – those that have never been patched before, and those that have been repaired. Repaired boats are worked upon by factory technicians using the same glue and same techniques used for a new boat, and...
-
Inflatable Pontoon Boats
10 August 2010 8:30 PM |
No Comments
Bryce Whitmore designed the modern whitewater inflatable pontoon boat, and in fact designed several models. The one that has been produced the most is a three-tube model of unparalleled maneuverability and load bearing capacity. This boat which is fourteen feet overall, can carry 6 passengers,...
-
A Review of Inflatable Boat Manufacturers
10 August 2010 8:30 PM |
No Comments
There are many manufacturers of inflatable boats on the market today. Included below is an overview of each of the key manufacturers. Zodiac Inflatable Boats: Zodiac Inflatable Boats can be set up in no time, stored in a closet at home, transported in the trunk...
-
The Benefits of Inflatable Fishing Boats
10 August 2010 8:30 PM |
No Comments
Inflatable fishing boats are great yacht tenders/camping boats that are light enough to be carried in a backpack. Some 8-foot inflatable fishing boats are good for two and gear, and are large enough to float in moderate whitewater rivers. They can also be used as...
-
How to Repair an Inflatable Boat
10 August 2010 8:30 PM |
No Comments
The owner can attempt small inflatable boat repair if factory-gluing instructions are followed closely. Rips and holes larger than one inch in the air chambers, or those within two inches of a seam, should be repaired with internal and external patches by a professional repair...
-
Boat Trailer Rentals
10 August 2010 8:30 PM |
No Comments
It is important to choose the proper trailer for a boat as more damage can be done to a boat by the stresses of road travel than by normal operation. A boat hull is perfectly designed so as to be supported evenly by water. So,...
-
Inflatable Boats: An Overview
10 August 2010 8:30 PM |
No Comments
Inflatable boats are made from flexible material, usually rubber, canvas, or neoprene, and hold air at high volume but low pressure. They need to be fitted with a frame to which an oarlock mount is firmly attached. Such frames are either made of metal or...
-
Rigid Inflatable Boats
10 August 2010 8:30 PM |
No Comments
A rigid inflatable boat is defined as a hard-hulled boat with air inflatable collars. RIB hulls are made of fiberglass, aluminum or composite materials. The soft bumpers or fenders, called “sponsons,” can be air tubes, or all foam systems. These boats are powered by a...
-
Boat Towing
10 August 2010 8:30 PM |
No Comments
Boat towing or trailering across the United States is subject to different state laws as far as maximum speeds, trailer equipment requirements, trailer dimensions, brakes, insurance, and accessories such as reflectors are concerned. A separate permit for boat towing in each state is also required....
-
Pontoon Boat Covers
10 August 2010 8:30 PM |
No Comments
Own a boat and a vista of immense opportunities for recreation opens. The options are many. Come the much awaited weekend and you can leave behind the madding crowd and commune with the serenity of the waters or if it is spending time with your...