Lasers that lie in the green spectral region with a wavelength of 510 to 570 nanometers are termed as green lasers. Green laser technology is used in laser pointers, laser projection displays, interferometers, and for pumping of solid-state lasers such as Ti-sapphire lasers. It is also used in processing different types of materials such as copper, gold, or silicon as they have a much higher absorption coefficient as compared to near-infrared lasers.
Green laser usage and performance is limited, as it has a low spectrum range for selecting a laser gain media. However, they are the most commonly used visible lasers due to their uniqueness.
The most common lasers include Argon-ion lasers that are created with the amplification of light in argon plasma formed with an electrical discharge. They are potent light sources for various wavelengths and can achieve highest amount of power at 514 nanometers. Green lasers can easily exceed these limits, but will have to use many kilowatts of electrical power and the corresponding increase in dimensions of cooling systems will be significant. Small air-cooled tubes are used in green lasers that require hundreds of watts of electrical power for generating green laser beams of 10 mille-watts capacity. The tubes are very expensive and have a limited operational life of around a few thousand hours.
Another type of green laser is the Erbium-doped up-conversion laser based on erbium-doped fibers or bulk crystals that can emit around a 550-nanometer good quality laser beam. Frequency-doubled is another technique of creating green laser, in which a frequency doubler is used to convert radiation emitted by a normal laser into green laser. This technique is however very costly and is used only for conducting research work.
Research scientists are working on a number of projects for developing a mechanism that will enable the transmission of electronic data via green lasers. This mechanism, if successfully developed at affordable costs, will change the way people communicate with each other.
Related Articles of Interest :
-
Hand Held Lasers
10 August 2010 8:30 PM |
No Comments
The US food and drug administration (FDA) has classified lasers from class I to class IV. They are classed according to the hazard posed by the amount and type of light they emit, with Class I lasers being non-hazardous and Class IV lasers being the...
-
Lasers and Fiber Optics
10 August 2010 8:30 PM |
No Comments
The use of lasers in fiber optics is an important milestone in the technical field. Because of their capability for higher modulation frequency, lasers were identified as an important means of carrying information. Laser diodes (LD) or light emitting diodes (LED) have the power to...
-
Low Level Lasers
10 August 2010 8:30 PM |
No Comments
Health awareness among the population has motivated many people to undertake daily activities such as walking, cycling, running, and jogging. Many people have also involved themselves in different games and sports such as gymnastics, fitness training, tennis, football or water sports to skating, skiing, and...
-
Cold Lasers
10 August 2010 8:30 PM |
No Comments
Light has been considered to have healing and stimulating effects on the human body since the dawn of humankind. Cold lasers follow this line of thought and are used in the treatment of injuries related to the human tissue. Treatment effected by cold lasers is...
-
Cosmetic Lasers
10 August 2010 8:30 PM |
No Comments
Lasers are often described as photon emitting beams in a coherent and consistent way via an optical source. They were invented many years ago and were not designed for commercial usage as the technology was in its infancy. Technological advancements in all fields of science...
-
Aesthetic Lasers
10 August 2010 8:30 PM |
No Comments
A laser can be defined as an optical source that emits photons in a coherent beam. Lasers were first discovered in the year 1960 and were proposed as a variation of the ‘maser’ principle at that time. Laser technology has improved manifold since that time...
-
Ceiling Lasers
10 August 2010 8:30 PM |
No Comments
Laser emitting devices can be described as an optical source that emits photons in a consistent and coherent beam. Lasers were used or the first time in the year 1960 and were used as a variation of the ‘maser’ principle at that time. Since then,...
-
Laser
10 August 2010 8:30 PM |
No Comments
Back in 1958, Arthur L. Schawlow, a researcher at Bell Labs, invented the laser. This invention, which opened the way to a multibillion-dollar industry, was based on the use of infra-red light or the visible spectrum. Laser, or ‘Light Amplification by Stimulated Emission of Radiation’,...
-
Laser Surgery
10 August 2010 8:30 PM |
No Comments
It’s been over 30 years since laser surgery was first used on humans to treat them for various diseases. Since then, its popularity has soared even higher because it can cure a number of problems quickly, and without causing much pain. Laser surgery is most...
-
Dental Lasers
10 August 2010 8:30 PM |
No Comments
The latest use of lasers can be seen in the field of dentistry where specially designed dental lasers are replacing conventional dental tools such as drills, gougers, and elongated needles, which caused a lot of pain and discomfort to the patient. All these discomforting tools...