Are you working on a chemical or pharmaceutical process industry? Or do you have experience working in textile manufacturing? If you do, perhaps you know ball valves are parts of quarter turn valves or rotary valves. By turning a handle that is attached to a ball that is inside the valve, the valves open. They then move in response to fluid or mechanical pressure.
Inside the valve, there is a ball that has a port, which is actually a hole at the middle. When this hole is aligned with both valve ends, liquid can flow easily through it. After the valve has been closed, the hole becomes perpendicular to the valve ends impeding the flow of liquid.
Lots of different industries make use of ball valves in order to control fluid. Some of these industries are oil and gas manufacturers, chemical and petrochemical manufacturers, paper manufacturers, the textile manufacturing, power plants, steel manufacturers, pharmaceuticals processing and water and sewage plants.
There are two types of ball valves: the full port and the standard port. A full port ball valve makes use of an oversize ball in order to allow unrestricted flow. The size of the ball and the pipeline are identical, so this has a lower loss of friction. A standard port, on the other hand, has a slightly controlled flow and makes use of a smaller ball. This ball is smaller than the pipeline, and it also has a smaller port. The valve’s pipe is one pipe size bigger than the standard port in which the liquid flows.
The use of the different types of ball valves gives numerous advantages to many industries in the world today. Without these ball valves, controlling fluid will certainly be a big concern of these manufacturing and processing companies.
Related Articles of Interest :
-
An Introduction To Valves
10 August 2010 8:30 PM | No CommentsIn this modern society, valves are considered very useful components in different processes of manufacturing and systems of supply. If you look around you, values are part of every household. They are responsible for controlling the flow of all types of liquid, as well as...
Read More -
Solenoid Valves
10 August 2010 8:30 PM | No CommentsHave you ever used an industrial air hammer? Have you checked on your automotive starter system at one point or another? Have you ever seen an electric bell assembly? If you answer yes to any of these questions, then you probably know what a solenoid...
Read More -
EGR Valves
10 August 2010 8:30 PM | No CommentsWith the advent of modern technology, a lot more people are enticed to own their own vehicle, thus emissions of these vehicles pose a threat of causing air pollution. There is nothing wrong with modern technology, especially if it is beneficial to all, but if...
Read More -
Golf Ball Reviews
10 August 2010 8:30 PM | No CommentsJust as all new products that come on the market have their individual reviews, so do golf balls. There are numerous golf balls being manufactured everyday, with new models and types being introduced every once in a while. The variations in the golf balls usually...
Read More -
Ball Bearings
10 August 2010 8:30 PM | No CommentsOver the past five decades, the life of ball bearings has greatly increased. In fact, from its 1973 levels, the life span has improved a hundred times. This is partly due to the use of vacuum-induction-melted, vacuum-arc-remelted (VIM-VAR) AISI M-50 steel and improved oil filtration...
Read More -
Golf Ball Logos
10 August 2010 8:30 PM | No CommentsLogo golf balls are considered the true ambassador to the game of golf. They occupy approximately twenty percent of the golf ball business today and are mainly used for corporate branding. It is through logo golf balls that you build and maintain successful business relationships...
Read More -
Radiators
10 August 2010 8:30 PM | No CommentsRadiators, as the name suggests, are devices that radiate heat. These heat-exchanging devices can be found in automobiles, buildings and electronics. This device is designed to transfer heat from the water that flows through it, to the air blown through it by the fan. Often,...
Read More -
Oxygen Masks
10 August 2010 8:30 PM | No CommentsOxygen masks are effective oxygen delivery device which is used mainly to supply oxygen from a storage tank to the lungs. Usually, this device is a mask or covering of the nose and mouth which is made of plastic silicon and rubber. Many people make...
Read More -
Vacuum Pumps
10 August 2010 8:30 PM | No CommentsVacuum pumps are used to pump gases out of an area, leaving a partial vacuum. The vacuum pump was invented by the German named Otto von Guericke. The flow of air removal, the amount of vacuum produced, and the power that is required to produce...
Read More -
Hole In One Plaques
10 August 2010 8:30 PM | No CommentsA hole-in-one is such a rare feat that everybody wants to make the moment memorable. Making a hole-in-one is a proud moment in every golfer’s life. And hole-in-one plaques will capture the moment forever. That’s why the demand for hole-in-one plaques is going up. You...
Read More